• Toll Free: 866-534-3900
  • Local: 708-534-3900
  • FAX: 708-534-3957

Intertape PG-21 on Liner

  • Intertape PG-21 Lined High Temp Crepe Tape

PG-21 Lined High Temp Crepe Tape, 325°F

Viadon provides PG-21 masking tape by Intertape on release liner for making die cuts on your in-house plotter/cutter. PG-21 is the industry-standard wet-spray painting mask, that we call our VHTC1 series. Conforms well to irregular and curved surfaces, it is easily hand-tearable. Will withstand temperatures up to 30 minutes at 325°F with clean removal while parts are warm (this is recommended).

It is available in three linered widths. With medium tack and good line definition, PG-21 crepe tape is designed with a pressure sensitive adhesive. Apply to fully clean parts, then push down with moderate pressure to achieve best paint lines.

Stock items are subject to availability, but are usually available for shipment within 24 hours. PG-21 crepe tape tape data sheet  available in Technical Specifications tab, below.

  • Standard Widths
    Part Number Width (inches) Length (yards) Rolls / Case Quantity (rolls)  
    VHTC1-14000-LINED 14 60 1 Add to Shopping List
    VHTC1-20000-LINED 20 60 1 Add to Shopping List
    VHTC1-24000-LINED 24 60 1 Add to Shopping List

    PLEASE Contact Us if you do not see the width of tape you need.

    NOTE: Rolls are 60 yards long. Other widths may be available, but is dependent upon in-stock widths and usefulness of the off-cuts created.

    * Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Technical Specifications
    • Click here for PG-21 crepe tape tape data sheet
    • Total Thickness: 7.3 mils
    • Temperature Maximum: Up to 325°F (30 minutes)
    • Typical Uses: Masking for painting applications requiring a high temperature oven cure
    • Carrier: Thick crepe paper
    • Adhesive: Rubber/resin
    • Resistant to solvents
    • Good line definition
    • Exceptional cornering and superb conformability to irregular surfaces
    • Linered version available here for superb for creating one-off or short runs of custom die-cuts in-house on a plotter/cutter machine
    • Also available in slit roll form
    • Shelf life: 12 months from date of purchase

     

    All tapes are slit to width at time of order and cannot be returned for refund or credit.
    Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Helpful Hints
    • Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts.
    • Clean parts thoroughly before applying tape.
    • Apply tape to dry surfaces only.
    • Use paper or aluminum foil to cover a large surface area for less money; tape edges down.
    • Tape is for intermittent, one-time use only.
    • Store rolls on end in a cool, dry place.

Related Products