• Toll Free: 866-534-3900
  • Local: 708-534-3900
  • FAX: 708-534-3957

AF805NL - 3 mil Aluminum Foil Tape, No Liner

  • AF805NL 3 mil Aluminum Foil Tape, No Liner
  • AF805NL 3 mil Aluminum Foil Tape, No Liner

3 mil Aluminum Foil Tape No Liner, 250°F (anodizing, plating, shielding, ducts, sealing)

Viadon's aluminum foil can be used to mask during plating, shielding, cleaning, paint stripping and etching applications up to 250°F. The dead soft foil will adhere and conform to irregular surfaces. It is not designed for clean removal.
UL 723 Rated, Boeing Approved; BAC-5034-4.

This tape employs an acrylic adhesive. It is recommended for anodizing and plating applications.

Rolls are 60 yards long and can be cut in custom widths upon request.
Viadon slits all tapes in-house! PLEASE Contact Us if you do not see the width of tape you need listed below.

Can be die cut to a wide variety of shapes and sizes. Single roll and case quantities are available. For a FREE sample - Contact Us for more information. AF805/NL aluminum foil tape data sheet available in Technical Specifications tab, below.

  • Available Widths
    Part Number Decimal Width (inches) Fractional Width (inches) Roll Length (yards) Rolls / Case Quantity (rolls)  
    AF805-0375NL 0.375 3/8 60 96 Add to Shopping List
    AF805-0500NL 0.500 1/2 60 72 Add to Shopping List
    AF805-0750NL 0.750 3/4 60 48 Add to Shopping List
    AF805-1000NL 1 1 60 36 Add to Shopping List
    AF805-1500NL 1.50 1-1/2 60 24 Add to Shopping List
    AF805-2000NL 2 2 60 24 Add to Shopping List
    AF805-2500NL 2.50 2-1/2 60 12 Add to Shopping List
    AF805-3000NL 3 3 60 12 Add to Shopping List

    Single roll and case quantities are available. Can be die cut to a wide variety of shapes and sizes.

    For a FREE sample - Contact Us for more information.

    * All tapes are slit to width at time of order and cannot be returned for refund or credit.
    * Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Technical Specifications
    • Click here for AF805/NL aluminum foil tape data sheet
    • Total Thickness: 4.8 mil
    • Temperature Range: -20°F to 250°F
    • Typical Uses: Masking for plating and paint stripping; also used for shielding and etching applications
    • Color: Silver
    • Carrier: 3 mil of aluminum foil material
    • Adhesive: acrylic-based adhesive
    • Excellent resistance to shrinking and solvents.
    • High reflectivity.
    • Good initial tack.
    • Wide temperature range.
    • Shelf life: 12 months from date of purchase.

     

    For a FREE sample - Contact Us for more information.

    * All tapes are slit to width at time of order and cannot be returned for refund or credit.
    * Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Masking 101 Helpful Hints
    • Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts.
    • Anodizers: Clean lines are best achieved by masking parts 24 hours BEFORE anodizing.
    • Clean parts thoroughly before applying tape.
    • Apply tape to dry surfaces only.
    • Use paper or aluminum foil to cover a large surface area for less money; tape edges down.
    • Tape is for intermittent, one-time use only.
    • Store rolls on end at 60-80F @ 50% humidity away from direct sunlight.
    • Shelf life is 12 months from date of shipment.

Related Products