LF420 - Lead Foil Tape, with Liner

• Click here for LF420 lead foil tape data sheet
• Total Thickness: 6.0 mil
• Temperature Range: 0°F to 275°F
• Typical Uses: Masking for plating, and anodizing, shielding, X-ray plates, radiation barrier, simulated lead windows.
• Color: Silver
• Carrier: 5 mil of dead soft lead foil material
• Adhesive: 1.0 mil of acrylic-based adhesive
  
• Excellent resistance to shrinking and solvents.
• Malleable; conforms well to rough and irregular surfaces.
• Dead-soft foil holds its shape.
• Shelf life: 12 months from date of purchase when stored at 70°F and 50% relative humidity.

IMPORTANT: Lead dust may be present on tape. USE GLOVES when handling this product! Waste from this product should also be disposed in accordance with all applicable law and regulations - SDS available.

NOTE: This tape is NOT intended to have clean-removal properties, and some adhesive may remain on the surface to which it is applied if the tape is removed. Use a commercially-available adhesive remover to clean excess adhesive.

For a FREE sample - Contact Us for more information.

* All tapes are slit to width at time of order and cannot be returned for refund or credit.
* Stock items are subject to availability, but are usually available for shipment within 24 hours.

• Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts.
• Anodizers: Clean lines are best achieved by masking parts 24 hours BEFORE anodizing.
• Clean parts thoroughly before applying tape.
• Apply tape to dry surfaces only.
• Use paper or aluminum foil to cover a large surface area for less money; tape edges down.
• Store rolls on end in a cool, dry place.
• Shelf life is 12 months from date of purchase when stored at 70°F and 50% relative humidity.