Aluminum Foil Tape on Liner

• Click here for AF-LT aluminum foil tape data sheet
• Total Thickness: 4.3 mil
• Temperature Range: -40°F to 250°F
• Typical Uses: Vapor barrier protection, waterproof sealing, heat reflection and heat dissipation, masking for plating and paint stripping
• Color: Silver
• Carrier: 3.0 mil of aluminum foil material
• Adhesive: 1.3 mil of acrylic-based adhesive
• Elongation: 5%
• Adhesion to steel: 50 oz./in.
• Tensile strength: 26 lbs./in.
• Excellent resistance to shrinking and solvents.
• High reflectivity.
• Good initial tack, even in cold conditions.
• Shelf life: 12 months from date of purchase.

NOTE: This tape is NOT intended to have clean-removal properties, and some adhesive may remain on the surface to which it is applied if the tape is removed. Use a commercially-available adhesive remover to clean excess adhesive.

For a FREE sample - Contact Us for more information.

* All tapes are slit to width at time of order and cannot be returned for refund or credit.
* Stock items are subject to availability, but are usually available for shipment within 24 hours.

• Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts.
• Anodizers: Clean lines are best achieved by masking parts 24 hours BEFORE anodizing.
• Clean parts thoroughly before applying tape.
• Apply tape to dry surfaces only.
• Tape is for intermittent, one-time use only.
• Store rolls on end in a cool, dry place.
• Shelf life is 12 months from date of purchase when stored at 70°F and 50% relative humidity.