Green polyester powder coating masking tape is the most-used tape for powder coating.
It cuts easily, adheres quickly and removes cleanly.
When possible and for the best results, remove this tape while parts are still warm. If removing from cold surfaces, pull tape at a 90 degree angle for best results.
Viadon's VGT-series masking tape for powder coating is a cut above most competitor's tapes, because it is American-Made .
The same-day trip from manufacturer to our dock ensures fresh, USA-quality tape that will last up to 12 months without degrading in effectiveness.
Just store on end in a cool, humidity-controlled location between 60F and 80F for best shelf life.
And with Viadon, you are not limited to a handful of tape widths.
Yes, we slit tape to 1/2", 3/4", 1" and 2".
But we can also set our digitally-controlled slitter to cut nearly any width of tape you need - even a single roll - at NO additional charge. Just meet our $50 minimum order.
Plus, most orders we get shipped same-day.
Viadon also die cuts powder coating tape disks to size, and offers custom-shapes die cutting and we have lined green polyester tape if you have your own plotter/cutter to make one-off or low quantities of custom shapes as well.
For more information about our high temp masking tape for powder coating, follow these links:
Need higher heat, or better conforming to complex curves and shapes? Check out these other high temperature tape options for powder coating masking from Viadon.