3M 8985L - Anodization Masking Tape w/Liner

  • 3M 8985L Anodization Masking Tape 1 Inch
  • 3M 8985L Anodization Masking Tape 12 Inch

Purple tape for masking in Type 1 chromic anodizing

3M Anodization Masking Tape 8985L is a reliable non-silicone solution for Type I (chromic acid) anodization. Designed for performance, it is specifically resistant to chromic acid and provides sharp lines with a rubber adhesive for easy removal. This tape can mask and de-mask up to 5x faster* than labor-intensive liquid masking for improved productivity.

Engineered Specifically for Resistance to Chromic Acid
3M Anodization Masking Tape 8985L has a tough polyester carrier to stand up to chromic acid anodization baths (Type I anodization). It also features a non-silicone rubber adhesive to minimize the risk of silicone contamination that could impact downstream processes such as bonding or paint adhesion. This tape provides sharp masking edges, minimizing leakage and the need for rework, and can be used with or without chemical film on a variety of aluminum and other metal alloys.

3M Anodization Masking Tape 8985L can replace complex, messy liquid masking and the unpleasant odors involved. The transparent tape is easy to position and can be applied in fewer steps; it also eliminates the cure time of a liquid so that overall masking and de-masking can be accomplished up to five times faster*. Ease of application and clean, one-piece removal mean users could save up to 60%* on labor time and associated costs. This tape is transparent purple with a printed backing for visibility and has a liner for easy die-cutting.

*Up to 5x faster and up to 60% reduction in labor time both based on 3M internal data.

Rolls are 72 yards long and can be cut in custom widths upon request. Viadon slits all tapes in-house! PLEASE Contact Us if you do not see the width of tape you need listed below. Single roll and case quantities are available. 3M 8985L anodizing tape data sheet available in Technical Specifications tab, below.

All tapes are slit to width at time of order and cannot be returned for refund or credit. Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Available Widths
    Part Number Width (inches) Length (yards) Rolls / Case Quantity (rolls)  
    3M-8985L-1x72 1 72 48 Add to Shopping List
    3M-8985L-2x72 2 72 24 Add to Shopping List
    3M-8985L-3x72 3 72 16 Add to Shopping List
    3M-8985L-4x72 4 72 12 Add to Shopping List
    3M-8985L-6x72 6 72 8 Add to Shopping List
    3M-8985L-8x72 8 72 6 Add to Shopping List
    3M-8985L-12x72 12 72 4 Add to Shopping List
    3M-8985L-16x72 16 72 3 Add to Shopping List
    3M-8985L-24x72 24 72 2 Add to Shopping List
    3M-8985L-48x72 48 72 1 Add to Shopping List

    PLEASE Contact Us if you do not see the width of tape you need.

    Single roll and case quantities are available.

    * All tapes are slit to width at time of order and cannot be returned for refund or credit.
    * Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Technical Specifications
    • Click here for 3M 8985L anodizing tape data sheet
    • Temperature Range: Up to 200°F
    • Adhesive: Rubber
    • Designed specifically for masking in chromic acid (Type I) anodization baths.
    • Masks and de-masks up to 5x faster* than liquid masking, with no cure time.
    • Transparent purple tape for fast, accurate positioning and easy identification.
    • Provides sharp masking lines and minimizes leaking to reduce the need for part rework.
    • Non-silicone formulation helps reduce post-process coating and bonding failures.
    • Polyester backing with rubber adhesive and film liner.
    • Liner provides added stability for easy die-cutting.

     

    All tapes are slit to width at time of order and cannot be returned for refund or credit.
    Stock items are subject to availability, but are usually available for shipment within 24 hours.

  • Helpful Hints
    • Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts.
    • Anodizers: Clean lines are best achieved by masking parts 24 hours BEFORE anodizing.
    • Clean parts thoroughly before applying tape.
    • Use only sharp plotter/cutter blades for best results.
    • Apply tape to dry surfaces only.
    • Tape is for intermittent, one-time use only.
    • Store rolls on end in a cool, dry place.
    • Shelf life is 12 months from date of purchase.